Sailing - Hardware

Micro Carbo-Cam Cleat Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat.Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.Specifications: Weight: 26g / 0.9oz Maximum working load: 68kg / 150lb

T-Cleat Cam Cleat - Small - Red w/Grey Base2-8mm(3/32" - 5/16") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through...

Standard Carbo-Cam® Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead.Specifications: Weight: 54g / 2 oz. Maximum working load: 91kg / 200lb.

Micro Carbo-Cam CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent.Specifications: Height: 22mm / 7/8in. Length: 48mm / 1-7/8in. Width: 24mm / 15/16in....

Standard Carbo-Cam® CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent. Specifications: Height: 30mm / 1-3/16in. Length: 65mm / 2-9/16in. Width: 32mm / 1-1/4in...

Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Technical Specifications: Material - Nylon Dimensions (Cleat length) - 4.37" (111 mm) Weight - 3.17 oz (90 g) Maximum Stanchion (Tube) Size...

Asymmetric Carbine Hook - Length 100mm - 13/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 3-15/16" Working...

Swivel Dead Eye & Cleat Fairlead - 3-12mm(1/8 - 1/2") RopeSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and minimum distortion under...

Drain Plug Only - Plastic NylonFeatures: Plug to suit RF294 & RF737 Water tight seal Retaining legs UV Stabilized Nylon plug Specifications: Color: Black/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.05 lbs UPC: 9316800031252

Fairlead - Stainless Steel Lined - 14mm(9/16") ID - BlackFairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.Features: Impact resistant, U.V. stablised Nylon Stainless steel liner Specifications: Color:...

Low Friction Ring - 21mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded...

Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you...

Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many...

Deck Plate with Fixing & Eye with Blanking Plug - M8 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied...

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features: Pintle Diameter: 9.5mm Fastenings Diameter: 5mm Weight: 70g

Shroud Cleat with EyeBarton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features: Wide eye opening for stowage of shackles Clamps onto shroud wire without causing damage...

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are...

Transom Bung & Socket Set - BlackThis screw-type drain bung and socket is still among the best available. They are supplied with a rubber ‘O’ ring for a watertight seal. Quick Guide (pdf)

Quick Cleat - 1/4" - PairThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load...

Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.Specifications: Length: 15mm (19/32") weight: 7gm(.23oz)

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired...

Symmetric Carbine Hook - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Symmetrical shape With eye to attach a webbing or a splicing Applications:For fastening applications Specifications: Materials 316L stainless steel grade Length (inch) 3-5/32" Working load (lb) 1940 WLL (lb) 570 Breaking...

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard...

Flat/Small Sail Track StopsFlat/Small: 0.42 x 1 x 0.125" (11 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large...

Round Sail Track StopsRound 0.50" dia. x 0.875" (13 x 22mm)When it's time to lower your sail you can rely on Davis' Round Sail Track Stop to hold your sail and its slides in place on the mast and boom. Large knurled wheels are...

Opening Luff Rope PrefeederFeatures: Single-handed operation by pushing on the spring Easy to install with a lashing or fixed to the forestay Can be installed below any headsail foil or headsail reefing configuration Stainless steel forged part Applications: Ideal for bowman operations No need...

Stainless Steel Welded Pad Eye - 3"L x 1"WSpecifications: Eye Width 7/8" (22 mm) Eye Height 7/8" (22 mm) Eye Stock 1/4" (6 mm) Length 3" (76 mm) Width 1" (25 mm) Fasteners (2), 1/4" RH (6 mm) C/C 2-3/16" (55 mm) SWL 2500...

Investment Cast Pad Eye - 2-1/2" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-53 separately. Specifications: Eye Width 1" (25 mm) Eye Height 13/16" (21 mm) Eye Stock 3/8" (10 mm) Length 2-1/2" (64 mm) Width 2-1/2" (64 mm) Fasteners (4), 1/4"...

Sail Slide - Internal Track - 22mm(7/8") Wide x 42mm(1-21/32") LongImpact Resistant, U.V. Stabilized NylonWhite Specifications: Color: White Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 9316800210787

Shock - 3/16" Line - 1/4" Webbing - Grey - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance...

Shock - 3/16" Line - 1/4" Webbing - Red - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance...

V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope DiameterV-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.Features: Lightweight and corrosion proof Greater abrasion...

C-Cleat Cam Cleat - Medium - Grey w/Grey Base3-12mm(1/8" - 1/2") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through...

BPI-32 Bulkhead Pipe Gland Reducer 32mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 28 and 32mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPI-20 Bulkhead Pipe Gland Reducer 20mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 18.5 and 20mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPI-25 Bulkhead Pipe Gland Reducer 25mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 22.5 and 25mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

Backing Plate for 704-02-62Schaefer Stainless Steel Backing Plate for 704-02-62.

2-3/8" Aluminum SheaveFeatures: Material: Aluminum Max Line 5/8" (16 mm) Max Wire 3/16" (5 mm) Outside Diameter 2-3/8" (60 mm) Inside Diameter 1/2" (13 mm) Width 3/4" (19 mm)

Aluminum Deck Cleat - 6"Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g)

Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for boats from 27' - 53'. Eliminates possibility of halyard wrap with furling systems when...

Exit Plate/Flat for up to 3/4" LineSpecifications: Halyard Size 3/4" (19 mm) Mast Stat Opening 3-1/4"x 1" (83 mm x 25 mm) Fasteners (4), #10 RH (5 mm) Weight 1 oz. (28 g)

Flat/Large Sail Track StopsFlat/Large: 0.75 x 1 x 0.125" (19 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large...

Asymmetric Carbine Hook - Length 120mm - 15/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 4-23/32" Working...

Asymmetric Carbine Hook - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 2-23/64" Working...

Asymmetric Carbine Hook - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 3-5/32" Working...

Tiller-TamerMaintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with automatic steering systems. No loss of cockpit...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while...

3" HR Safety Snap Hook - 75mmFeatures: HR 17.4 PH stainless steel grade forged snap hook Various applications onboard Outstanding working and breaking loads Modern design Applications:Various uses onboard: fastening applications

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars...

Symmetric Carbin Hook Without Eye - Length 120mm - 15/32"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications:...