Sailing - Hardware

Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Technical Specifications: Material - Nylon Dimensions (Cleat length) - 4.37" (111 mm) Weight - 3.17 oz (90 g) Maximum Stanchion (Tube) Size...

Asymmetric Carbine Hook - Length 100mm - 13/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 3-15/16" Working...

Low Friction Ring - 21mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded...

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are...

Transom Bung & Socket Set - BlackThis screw-type drain bung and socket is still among the best available. They are supplied with a rubber ‘O’ ring for a watertight seal. Quick Guide (pdf)

Quick Cleat - 1/4" - PairThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired...

Symmetric Carbine Hook - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Symmetrical shape With eye to attach a webbing or a splicing Applications:For fastening applications Specifications: Materials 316L stainless steel grade Length (inch) 3-5/32" Working load (lb) 1940 WLL (lb) 570 Breaking...

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard...

Flat/Small Sail Track StopsFlat/Small: 0.42 x 1 x 0.125" (11 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large...

Opening Luff Rope PrefeederFeatures: Single-handed operation by pushing on the spring Easy to install with a lashing or fixed to the forestay Can be installed below any headsail foil or headsail reefing configuration Stainless steel forged part Applications: Ideal for bowman operations No need...

Stainless Steel Welded Pad Eye - 3"L x 1"WSpecifications: Eye Width 7/8" (22 mm) Eye Height 7/8" (22 mm) Eye Stock 1/4" (6 mm) Length 3" (76 mm) Width 1" (25 mm) Fasteners (2), 1/4" RH (6 mm) C/C 2-3/16" (55 mm) SWL 2500...

Investment Cast Pad Eye - 2-1/2" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-53 separately. Specifications: Eye Width 1" (25 mm) Eye Height 13/16" (21 mm) Eye Stock 3/8" (10 mm) Length 2-1/2" (64 mm) Width 2-1/2" (64 mm) Fasteners (4), 1/4"...

BPI-32 Bulkhead Pipe Gland Reducer 32mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 28 and 32mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPI-20 Bulkhead Pipe Gland Reducer 20mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 18.5 and 20mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPI-25 Bulkhead Pipe Gland Reducer 25mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 22.5 and 25mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

2-3/8" Aluminum SheaveFeatures: Material: Aluminum Max Line 5/8" (16 mm) Max Wire 3/16" (5 mm) Outside Diameter 2-3/8" (60 mm) Inside Diameter 1/2" (13 mm) Width 3/4" (19 mm)

Aluminum Deck Cleat - 6"Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g)

Exit Plate/Flat for up to 3/4" LineSpecifications: Halyard Size 3/4" (19 mm) Mast Stat Opening 3-1/4"x 1" (83 mm x 25 mm) Fasteners (4), #10 RH (5 mm) Weight 1 oz. (28 g)

Flat/Large Sail Track StopsFlat/Large: 0.75 x 1 x 0.125" (19 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large...

Asymmetric Carbine Hook - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 2-23/64" Working...

Asymmetric Carbine Hook - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tethers Specifications: Materials 316L stainless steel grade Length (inch) 3-5/32" Working...

3" HR Safety Snap Hook - 75mmFeatures: HR 17.4 PH stainless steel grade forged snap hook Various applications onboard Outstanding working and breaking loads Modern design Applications:Various uses onboard: fastening applications

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars...

Asymmetric Carbine Hook - Length 170mm - 15/32"Features: Grade 316L stainless steel carbine hooks Asymmetrical shape to support higher loads With eye to attach a webbing Applications: For fastening applications Integrated on Wichard tether Specifications: Materials 316L stainless steel grade Length (inch) 6-11/16" Working...

Sister Clip - Stainless Steel - LargeEffective means of quickly attaching and detaching ropes58.0mm(2-1/4") Length Specifications: Color: Stainless Box Dimensions: 1"H x 1"W x 2"L WT: 0.3 lbs UPC: 9316800053315

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to stanchion lead eyes. The...

Kevlar Cam Cleat MaxiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of...

Diamond Pad EyeThis pad eye can be used on deck for life lines or other applications and has a safe working load of 750 pounds.Specifications: 1/4 in. Bail Length: 2-5/8 in. Width: 1-1/2 in.

Traveller Eye (Pair) Size 0, 16mmFeatures: Size 0 16mm Traveller Eye Pair Recirculating ball bearing dinghy traveller range Complementing Barton’s successful larger traveller range, the dinghy traveller system uses proven recirculating Delrin ball technology and features a 16mm wide track.

Furling Top SwivelThe top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing.Features: Drum Diameter: 25mm Sail Area: 100 square foot Break Load: 1,108kg Safe Working Load: 554kg Weight: 55g

Triple DO 550 Rope ClutchModern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are from marine grade aluminum, anodized for long life in the harsh marine environment.True...

Aluminum Deck Cleat - 4"Length 4" (102 mm), Line Score 3/8" (10 mm), Fasteners (2), #10 FH (5 mm), C/C A 1" (25 mm), Weight 1.5 oz. (43 g)

Aluminum Deck Cleat - 8"Length 8" (203 mm), Line Score 5/8" (16 mm), Fasteners (2), 5/16" FH (8 mm), C/C A 2" (51 mm), Weght 8.5 oz. (240 g)

29mm Carbo Double Swivel Symmetrical Fishing PulleyDesigned to improve the deployment and retraction responsiveness and the precise presentation of bait teasers aboard sport fishing boats. The unit features two back-to-back 29 mm sheaves, which make it symmetrical and balanced. This is the first fishing...

Sail Slide - Internal Track - 16mm(5/8") Wide x 32mm(1-1/4") LongImpact Resistant, U.V. Stabilized NylonWhite Specifications: Color: White Box Dimensions: 0"H x 1"W x 2"L WT: 0.01 lbs UPC: 9316800210770

Symmetric Carbine Hook Without Eye - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications:...

Symmetric Carbine Hook Without Eye - Length 80mm - 5/16"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications:...

C-Cleat Cam Cleat - Small - Black w/Black Base2-8mm(3/32" - 5/16") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through...

Screw Inspection Cover - 6" (103mm) - WhiteThese covers are manufactured from high-impact polycarbonate and feature an easy start thread and a built-in ‘O’ ring seal. Quick Guide (pdf)

Micro Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 22mm / 7/8in. Weight: 50g / 1.75oz Minimum line: 3mm / 1/8in Maximum line: 6mm / 1/4in Fastener spacing: 27mm / 1-1/16in Fasteners: 4 FH mm /...

Hinged Pad Eye- 1/4"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle...

Stanchion Base Single - Heavy-DutyRugged SS Base is canted 5 degrees inboard to match most deck cambers. Features a 5/16" (8mm) welded rod reinforcement which also serves as a bail for snatch blocks and other gear. Specifications: Length 5-1/8" (130 mm) Width 2-3/4" (70 mm)...

FRX15 Friction Ring - 15mm (19/32")Features: Efficient and light FRX Wichard thimbles are efficient, light, and reliable Very strong and can be used for heavy loads and semi-static lines FRX thimbles are designed to make your lines run smoothly with minimum wear They are...

Removable Eye Deck Plate/AssemblySpecifications:  Eye Width 5/8" (16 mm) Eye Height 5/8" (16 mm) Eye Stock 1/4" (6 mm) Length 3" (76 mm) Width 3" (76 mm) Fasteners (4), 1/4" FH (6 mm) C/C A 2" (51 mm) C/C B 2" (51 mm) SWL...

Stainless Steel Cleat - 8"8" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 5/8" (16mm), Length 8" (203mm), Height 2.0" (51mm), Fastener size 5/16" FH, Fastener center/center 2.0" (51mm), Weight 1.3 lb (.59kg)

Stainless 1-1/4" T-Track Slider - Eye Slide/LinedSpecifications: Track Size 1-1/4" x 3/16" (32 mm x 5 mm) Max. Boat Length 38' (10 m) Max. Boat Weight 12000 lbs. (5455 kg) Max. Sail Area 520 sq. ft. (48 m2) Length 4" (102 mm) Width 1-11/16"...

Shock - 3/8" Line - 3/8" Webbing - BlueThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance free. They...

Stainless Steel Cleat - 4.75"4.75" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 3/8" (10mm), Length 4.75" (120mm), Height .9" (23mm), Fastener size #10 FH, Fastener center/center 1.25" (32mm), Weight 4.1oz (.12kg)

Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard...