Marine Navigation & Instruments - Transducer Accessories

Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features: 8-Pin Length: 1M Chirp Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...

Replacement Transom Mount Transducer BracketThis replacement bracket kit has everything you need to mount your transducer on the transom of your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or...

Extension Cable for HOOK² TripleShot/SplitShot Transducer - 10'10' extension cable for connecting TripleShot/SplitShot Transducers to HOOK² Specifications: Type: Extension Box Dimensions: 2"H x 3"W x 6"L WT: 0.45 lbs UPC: 9420024171813

Mix & Match Cable for Raymarine 600W Non-CHIRP Transducers - 9mMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends...

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

8-Pin Transducer to 4-Pin Sounder Adapter CableConnect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.Compatible Devices: STRIKER™ 4 STRIKER™ 4 Portable Bundle STRIKER™ 4 Portable Bundle STRIKER™ 4cv STRIKER™ 4cv STRIKER™ 5 Ice Fishing Bundle...

TripleShot Transom Mount BracketTransom mount bracket for TripleShot Transducer Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 7"L WT: 0.25 lbs UPC: 9420024168387

Bullet/SplitShot Transom Mount BracketTransom mount bracket for Bullet & SplitShot Transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 7"L WT: 0.21 lbs UPC: 9420024168370

7-Pin Transducer Adapter Cable to HOOK²This adapter cable will adapt any Navico 7-pin tranducer to a HOOK2 unit. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC: 9420024166956

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in...

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W...

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.WARNING: This product can expose you to chemicals which are known to the State of California to...

12-Pin XDR Extension Cable - 10MFeatures: Extension Cable For Furuno Transducer 10M (33' Length) 12-Pin Color: Black This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Extension Box Dimensions:...

LSS-2 HD Skimmer Mounting Bracket - Stainless SteelMounting bracket for LSS-2 StructureScan HD transducer.Specifications:Stainless Steel Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 13"L WT: 0.95 lbs UPC: 9420024123751

Locking Collar Kit for RealVision 25-PinRaymarine Spare RealVision 25-pin locking collar kit Specifications: Type: Misc Box Dimensions: 1"H x 6"W x 9"L WT: 0.1 lbs UPC: 723193822623

Transom Mount BracketEasily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 7"L WT: 0.3 lbs UPC: 753759270155...

ActiveTarget 2 XL Recon Trolling Motor MountFeatures: Optional mount for ActiveTarget® 2 XL Transducer Compatible with all Recon trolling motors Utilizes the ActiveTarget® mounting attachment points on the Recon lower unit Trouble-free adjustment between Forward/Down XL and two Scout XL positions (Scout XL Shallow...

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).Use wrench 117WR-2 or 117WR-3 for...

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in...

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...

Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & TempThis replacement Transducer Bracket is for the plastic transom mount that can be used to replace the dual frequency transducers included with many Garmin units.WARNING: This product can expose you to chemicals which...

Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 7"L WT: 2.56 lbs UPC: 753759298517

ActiveTarget 2 XL Trolling Motor Shaft MountFeatures: Included with all ActiveTarget® 2XL transducer SKUs Compatible with Ghost, Ghost X, Ultrex Quest & 27-33mm diameter round shafts/poles Easy to install with the new cam-lock style clamp Trouble-free adjustment between Forward/Down XL and two Scout XL...

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264...

xSonic Pigtail Wiring Block AdapterConnect transducer with NO connector to echo sounder requiring a 9-Pin connector. Specifications: Type: Adapters Box Dimensions: 4"H x 6"W x 8"L WT: 1.21 lbs UPC: 9420024154618

Forward-Facing Motorized Sonar MountThe FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the bow-mount trolling motor but still be controlled independently.*The FORESIGHT was designed to be used with a...

Transducer Mounting PlateFeatures: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 3"W x 12"L WT: 1 lbs UPC: 022697941107

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Navico units. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 10"L WT: 0.2 lbs UPC: 010407340326

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with SI-TEX NavPro units. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 10"L WT: 0.2 lbs UPC: 010407340302

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 10"L WT: 0.2 lbs UPC: 010407340319

Trolling Motor Barrel Mount f/Livescope Plus LVS34 Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular Minn Kota® and MotorGuide® trolling...

Perspective Mount f/Livescope Plus LVS34The Perspective Mode Mount takes your LiveScope™ Plus real-time scanning sonar to the next level. Attach your LVS34 transducer to this mount to add an overhead sonar view that’s perfect for scouting and fishing in shallow water. Specifications: Type: Mounting...

Foulfree Transducer Coating Formulated by industry-leading scientists and certified by Airmar for transducers.   Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also increase the turbulence over the face of the transducer causing aeration...

Trolling Motor Mount f/GT36 and GT56 Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x...

Panoptix™ LiveScope™ LVS12 Trolling Motor Shaft MountMount a compatible Panoptix™ transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota® and MotorGuide® trolling motors. WARNING: This product can expose you...

Panoptix LiveScope™ Transducer Extension Cable - 10' - 21-PinExtend the cable length of your compatible Panoptix™ transducer with this 10 ft (3 m) cable.Compatible Devices: Panoptix LiveScope™ System Panoptix™ LVS32 Transducer WARNING: This product can expose you to chemicals which are known to the...

Adapter Cable - 25-Pin to 7-Pin - CP370 Transducer to Axiom RVThe Raymarine transducer adapter cable allows you to keep your existing 600w Airmar transducer used with a CP370 sonar module and adapts it to your Axiom RV. The 7-pin side connects direct to...

Transducer Support Arm The transducer support arm fits over the Vexilar rod holder.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type:...

9-Pin Black to 7-Pin Blue Adapter Cable f/XID TransducersThe 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.Use with Airmar Chirp transducers Specifications: Type: Adapters Box Dimensions: 2"H x 4"W x 7"L WT: 0.24 lbs UPC: 9420024165355

RV-100 RealVision 3D Transom Bracket KitThis transom mount transducer service kit includes all of the spare parts and accessories originally included with the RV-100 transducer. The bracket kit includes the stainless steel transom bracket and mounting screws, kick-up pivot hardware, transducer carrier bracket and...

Heavy-Duty Transom Mount Bracket w/Spray ShieldMount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel with the...

Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures: Length: 1M 9-Pin for Med, High, and Highwide Transducers, Single Chirp Transducers This product may not be returned to the original...

Adapter Cable for Axiom Pro with CP370 TransducerUsed to connect a conventional 600W transducer to an Axiom Pro multifunction display. 11-pin to 8-pin adapter cable to attach to an existing 8-pin Airmar CP370 style transducer to Axiom Pro. Specifications: Type: Adapters Box Dimensions: 1"H...

Adapter Cable for CPT-S Transducers To Axiom Pro S Series UnitsAdapter Cable (25 pin to 9 pin) attach DownVision (CPT-1xx) transducer to Axiom RV.Features: Type: 25 pin to 9 pin Applications: DownVision (DV) and RealVision (RV) Transducers Function: Connect DownVision or CHIRP Transducer to...

TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 13"L WT: 0.8 lbs UPC: 9420024157183

9-Pin Black to 7-Pin Blue Adapter Cable for Non-CHIRP TransducersConnects a non-CHIRP transducer with a 9-pin black connector to the older 7-pin blue sockets on displays and echosounder modules. For use with transducers that have an analog temperature sensor.

Flat Mount Bracket for StructureScan 3D Transducer & TotalScan Transducer3D Transducer Flush Mount Bracket is used to flush-mount the transducer under the boat's hull. Suits TotalScan and 3D Transom Transducers. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 13"L WT: 0.85 lbs...

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to the State of California...