Products

Deck Plate with Fixing & Eye with Blanking Plug - M8 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied...

Genoa Slide Car (25mm)Designed with a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks.Plain bearing genoa cars, sliders, and spinnaker pole slides.A popular range of Genoa cars and sliders designed to run on 25mm...

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to stanchion lead eyes. The...

Large Snatch Block for Yachts Up to 40' (12.2M) - Stainless Steel SnapBarton Snatch Blocks give the crew the option to locate the block anywhere on deck using the stainless steel snap shackle, then locate a rope into the sheave without the need to...

Low Friction Ring Strap Eye - Stainless SteelFor the concerning dinghy sailor. Barton has offered stainless steel deck eyes for a long while, but as performance on boats improves, the desire to reduce friction on deck fixings and turning points of lines becomes more...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired...

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment.   The unique, super-low friction ball race system runs on a large...

58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low friction ball race system features Delrin balls running...

64mm Diameter Ball Bearing Rope SheaveA replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low friction ball race system features Delrin balls running...

Alu Foam Soft Grip Tiller Extension - 700mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Alu Foam Soft Grip Tiller Extension - 800mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Alu Foam Soft Grip Tiller Extension - 900mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Boomstrut – Dinghy - Black for Boats Up To 16"The Dinghy Boomstrut 44001 is manufactured and anodized in black only. It has a black webbing support sling that is fully adjustable and fits any boom. It is held in place by a return line...

Boomstrut – Silver/White for Boats Up To 20'Boomstrut 44010 is designed for boats up to 6m (20ft) in length with a maximum boom tip weight of 6.3kg (14 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom...

Carbon Fiber Tiller Extension - 1MFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our custom-designed foam grip handle to reduce fatigue during...

ClamSealThe ClamSeal™ can instantly repair splits and tears up to 3.5" (90mm) in length without using any hand tools or adhesives.ClamSeal™ is a glueless repair system that instantly repairs small tears or splits in inflatables above or below the waterline, regardless of the fact...

Deck Organizer - Size 1 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard size...

Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard...

Dinghy Mast PropDesigned to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts.The yolk features...

DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 3"W x 7"L WT: 0.1 lbs UPC: 5035088815470 Brochure (pdf)

DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs UPC: 5035088815463 Brochure (pdf)

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are...

DO 550 Rope Clutch - Handle Replacement handle for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Black Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs UPC: 5035088815456 Brochure (pdf)

DO 550 Rope Clutch - Spring Assembly   Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 4"W x 6"L WT: 0.01 lbs UPC: 5035088815494 Brochure (pdf)

Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.Specifications: Length: 15mm (19/32") weight: 7gm(.23oz)

Extra Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the...

Furling Drum - 3.74"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 8.5M of LineSpecifications: Drum Diameter: 95mm Sail Area: 100 square foot Break Load:...

Furling Top SwivelThe top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing.Features: Drum Diameter: 25mm Sail Area: 100 square foot Break Load: 1,108kg Safe Working Load: 554kg Weight: 55g

Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4") 'T' track. All...

High Load Eye 12mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making...

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making...

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making...

Kevlar Cam Cleat MaxiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types of...

Kevlar Cam Cleat MidiManufactured from a composite Kevlar/Zytal material, this advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight, and have excellent wear resistance. A progressive tooth design ensures maximum holding power on all types...

Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum...

Laser Replica 15:1 Boom Vang Assembly The Barton boom vang assembly gives all the advantages of systems costing twice the price. 15:1 purchase is achieved through clever design of the base plate, fitted with the unique Barton swivelling triple cam block. It is simple to fit...

Line Tamer - Grey PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type:...

Line Tamer - White PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type:...

Mast Base Organizer - 4 BlockThe Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodizing for a long-lasting finish.It accepts up to four double tang blocks mounted on individual stainless steel swivel posts but with three deck fixing points.The unit is...

Medium Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum...

Pillar Fairlead for 70200 Cam CleatThis add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind.Features: Made for Barton’s 70200 Midi Cam Cleat Stainless steel...

Pillar Fairlead for 70300 Cam CleatThis add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind.Features: Made for Barton’s 70300 Maxi Cam Cleat Stainless steel...

Quick Cleat - 1/4" - PairThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load...

Quick Cleat - 5/16" - Black The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load...

Quick Cleat - 5/16" - WhiteThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load...

Quick Cleat - On a Patch for Inflatables - 1/4"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The perfect solution for securing ropes onto inflatables, featuring a Quick Cleat mounted onto...

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger...

Ratchet Block - 55mmThe Barton Ratchet Block is designed to be used on mainsheet systems and spinnaker sheets on dinghies and keelboats and for small yachts up to 30 feet.Combining high-performance engineering and contemporary design, the 2-3/16" (55 mm) ratchet block is the first...

Screw Inspection Cover - 6" (103mm) - WhiteThese covers are manufactured from high-impact polycarbonate and feature an easy start thread and a built-in ‘O’ ring seal. Quick Guide (pdf)

Series 5 Fiddle Swivel Block- 54mmPlain Bearing BlocksBarton plain bearing blocks have a precision moulded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 54mm x 17mm Max rope diameter: 12mm Safe working load:...