Products

NMEA 2000 Drop Cable - 2 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more....

NMEA 2000 Drop Cable - 3 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more....

NMEA 2000 Drop Cable - 4 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more....

NMEA 2000 Drop Cable - 5 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable, waterproof connectors, it ensures a secure and interference-free connection to displays, GPS units, sensors, and more....

NMEA 2000 Female Terminator - 120 ohmNMEA 2000 terminators are essential components for completing and stabilizing your marine electronics network. Installed at each end of the backbone, these 120-ohm resistive terminators ensure proper signal integrity, reduce interference, and prevent data loss across all connected...

NMEA 2000 Male Terminator - 120 ohmNMEA 2000 terminators are essential components for completing and stabilizing your marine electronics network. Installed at each end of the backbone, these 120-ohm resistive terminators ensure proper signal integrity, reduce interference, and prevent data loss across all connected...

NMEA 2000 Non-Fused Power Cable - 2 MeterThis NMEA 2000 power cable (no fuse) is designed to deliver clean, reliable power to your NMEA 2000 network. Featuring a 5-pin molded connector on one end and stripped wire leads on the other, it allows for...

NMEA 2000 Power IsolatorThe NMEA 2000 power isolator is designed to safely separate power between two segments of an NMEA 2000 network while still allowing data to pass through uninterrupted. This is essential when integrating networks with multiple power sources or when isolating a...

NMEA 2000 Right Angle AdapterThe NMEA 2000 right-angle adapter is a compact solution for tight installations where standard straight connectors won’t fit. With a 90-degree design, it reduces cable strain and allows for a clean, low-profile connection to your NMEA 2000 network backbone or...

NMEA 2000 Right Angle Cable - 2 MeterThe NMEA 2000 right-angle drop cable is designed to save space and simplify installations in tight or crowded areas. With a 90-degree molded 5-pin connector on one end, this cable provides a clean, low-profile connection to your...

NMEA 2000 T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to NMEA 2000 standards, each NMEA T-connector features rugged, waterproof 5-pin connectors for reliable data transmission in...

Small Pet Life Vest (12-24 lbs) - TidalDesigned to keep your best friend safe, our Dog Vests made with marine-grade webbing and velcro give your pup all the protection they need without getting in the way of their doggie paddle. Whether your canine companion...

MRANT10 AM/FM Dipole AntennaDipole hide-away soft wire antenna that is designed for the marine environment.  Universal wire antenna plugs right in to your factory or aftermarket stereo. Features: AM/FM antenna Works with any stereo Cable length - 45" *Sold as an Individual WARNING: This product can...

MRANT12 AM/FM Rubber Antenna - BlackAdd or replace your AM/FM antenna with an unbreakable 12" rubber antenna from Boss Audio.Features: AM/FM Antenna Rubber-ducky type that cannot be broken Bulkhead style hardware with screw on nut Includes 56" cable 1/2" Cutout dimension  *Sold as an...

MRANT12 AM/FM Rubber Antenna - WhiteAdd or replace your AM/FM antenna with an unbreakable 12" rubber antenna from Boss Audio.Features: AM/FM Antenna Rubber-ducky type that cannot be broken Bulkhead style hardware with screw on nut Includes 56" cable 1/2" Cutout dimension  *Sold as an...

Product Description: Single barid construction makes Bzzz line kink-free, while the combination of spun polyester and multi-filiment polypropylene make it soft on the hand and lightweight. Features: �ۢStrong �ۢEasy to grip �ۢKink-free �ۢSpliceable Applications: �ۢMainsheets �ۢGenoa Sheets �ۢTraveler Lines Colors Available: �ۢBlue �ۢKhaki �ۢYellow...

Product Description: Single barid construction makes Bzzz line kink-free, while the combination of spun polyester and multi-filiment polypropylene make it soft on the hand and lightweight. Features: �ۢStrong �ۢEasy to grip �ۢKink-free �ۢSpliceable Applications: �ۢMainsheets �ۢGenoa Sheets �ۢTraveler Lines Colors Available: �ۢYellow �ۢGray Size...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while...

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while...

"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard...

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Add-A-CleatA versatile cleat easily mounts to a stanchion or rail 7/8" and 1" diameter ( will accommodate larger sizes with longer clamp). Construction consists of a husky Stainless Steel bracket and clamp with a 4-1/2" nylon coated aluminum cleat. Use them for fenders and...

Adjuster with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line....

Anchor Chain Claw-Hook TensionerThe "Claw Hook" design features a shorter overall length. The claw design will grab 1/4", 5/16" and 3/8" chain. The toggled claw enables you to grab the chain quickly and easily. Two 1/4" mounting holes are provided in the base of...

Closed Body Jaw to Swage Tubular Turnbuckle for 1/8" WireJaw to swage- Check Nut Locking.Specifications: 1/8" Wire 1/4" Pin 3" adj.

Closed Body Jaw to Swage Tubular Turnbuckle for 3/16" WireJaw to swage- Check Nut Locking.Specifications: 3/16" Wire 1/4" Pin 3" adj.

Cotter Pin KitKit Contents: (6) Cotter Pin 1/16" x 1/2" Type 316 Stainless Steel (6)Cotter Pin 3/32" x 3/4" Type 316 Stainless Steel (4) Cotter Pin 1/8" x 1" Type 316 Stainless Steel (10) Cotter pin 5/32" x 1-1/4 Type 316 Stainless Steel (10)...

Cotter, Ring & Clevis Pin Parts KitKit Contents: (30) Clevis Pin Dia. 3/16", Grip 9/32" (30) Clevis Pin Dia. 3/16", Grip 13/32" (10) Clevis Pin Dia. 3/16", Grip 17/32" (6) Clevis Pin Dia. 1/4", Grip 13/32" (30) Clevis Pin Dia. 1/4", Grip 1/2" (6)...

Deck Terminal with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the...

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications: 1/8" Wire 1/4"-28 3" adj.

Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications: 3/16" Wire 1/4"-28 3" adj.

Diamond Pad EyeThis pad eye can be used on deck for life lines or other applications and has a safe working load of 750 pounds.Specifications: 1/4 in. Bail Length: 2-5/8 in. Width: 1-1/2 in.

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs....

Double Jaw Rigging Toggle - 3/8" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs....

Double Jaw Rigging Toggle - 5/16" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs....

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Gate Eye to Splice Eye Fitting*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on...

Handy Lock Turnbuckle Jaw/JawThe 01 Series Handy Lock turnbuckle is one of our oldest products and still stands the test of time. Neat and compact and positively locked without cotter pins or check nuts, the Handy Lock has all the features needed for easy...

Hinged Pad Eye- 1/4"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle...

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle...

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.